Home / Product / Fence-type terminal blocks / Barrier Terminal Block DBT30C-8.25

Barrier Terminal Block DBT30C-8.25

Color:
  • Product Category Barrier Single-level Terminal Block
  • Nominal Operating Current 20 A
  • Rated Voltage (III/2) 300V
  • Rated Cross-section 22-12AWG
  • Number of Poles 2-24
  • Number of Rows 1
  • Number of Positions per Row 2-24
  • Product Series DBT30C
  • Pitch 8.25 mm
  • Connection Method Screw Connection with Clamp
  • Screw Head Type Phillips Slotted
  • Mounting Wave Soldering
  • Conductor / PCB Connection Direction 0 °
  • Color black
  • Pin Arrangement Linear Arrangement
  • Solder Pin [P] 3.6 mm
  • Number of Solder Pins per Potential 1
  • Packaging Type Carton Packaging
Product Parameters
Put everything away
  • Technical Data-UL/CUL

    The DBT30C-8.25 fence-type terminal block supports solder plate mounting, which makes it easy to achieve electrical connections between the device and the PCB (printed circuit board). The welding plate mounting method not only provides a strong mechanical connection, but also reduces resistance and inductance in the electrical connection, thereby improving the efficiency and stability of signal transmission. This feature makes the terminal block particularly suitable for applications requiring high-precision, high-reliability electrical connections, such as communication equipment, measuring instruments, and industrial automation control systems. The DBT30C-8.25 has a stitch length of 8.25mm, which meets international standards and is suitable for most PCB layout designs. This standardized design makes its integration into various circuit boards and devices more convenient, while also helping to shorten product development cycles and reduce manufacturing costs.

  • Technical Data - IEC
    • The grid-type terminal block design provides a variety of foot spacing options of 6.35~13mm.

    • Various terminals can be used for each specification, corresponding to voltages of 150~600V and currents of 10~40A.

    • The product provides double-sided partition and three-sided partition design to facilitate different line wiring protection and guidance

  • Material Information
    • Grid terminal blocks are easy to operate and the wiring is secure

    • Use stable products because their structure can withstand large torsions

    • Power terminal wiring on the device can provide a more stable signal connection

    • Widely used in power signal transmission scenarios of industrial control, energy storage and other equipment

    Screw
    M3.0 Steel Ni plated
    Solder Pin
    Copper alloy, Sn plated
    Housing
    PA66, UL94V-0
  • General parameters
    • Screw connection method, can be used worldwide

    • Fence-type wiring structure, stable and reliable connection

    • Welding plate installation enables electrical connection between equipment and PCB

    Reference Standards 
    UL IEC
    Rated Voltage 
    300V 250V
    Rated Current 
    20A 24A
    Wire Range
    20-12AWG 2.5mm²
    Contact resistance
    20mΩ
    Insulation Resistance 
    500MΩ/DC500V
    Dielectric Withstand Voltage
    AC2000V/1Min
    Operating Temperature Range
    -40 ℃~+105℃
    Torque
    5.1Kgf.cm/0.5Nm/4.43Lb.in
  • Certification
    Ningbo Dorabo Electric Co., Ltd
  • Product environmental compliance
    Ningbo Dorabo Electric Co., Ltd
Product Advantages
  • Screw connection method, can be used worldwide

  • Fence-type wiring structure, stable and reliable connection

  • Welding plate installation enables electrical connection between equipment and PCB

Ningbo Dorabo Electric Co., Ltd Back Top